| 4/29/08 - NETGEAR, Inc. (Nasdaq: NTGR) announced the launch of the ProSafe 802.11n Dual Band Wireless Access Point (WNDAP330), a feature-rich dual-band wireless solution that enables small and medium businesses to enjoy the enhanced speed and coverage benefits of 5GHz 802.11n wireless technology and provides the ability to support existing legacy 802.11b, 802.11g and 802.11a devices. The NETGEAR ProSafe 802.11n Dual Band Wireless Access Point (WNDAP330), which delivers up to 10 times the coverage and 15 times the speed of 802.11g-based networks, supports devices based upon the 5GHz 802.11a and 802.11n (draft 2.0 specification), or 2.4GHz 802.11b/g and 802.11n (draft 2.0 specification) technologies. The SNMP-manageable WNDAP330 incorporates 802.3af Power-over-Ethernet (PoE) support to eliminate power cables and simplify installation, and is ideal for deployment over large areas with support for point-to-point and point-to-multipoint bridging with Wireless Distribution System (WDS). The WNDAP330 secures the wireless network with a comprehensive feature set including WPA, WPA2, rogue AP detection, and 802.1x with RADIUS support. "The promised benefits of Wireless-N networks are not being realized in many companies due to the existence of 11b and 11g clients in the network. The backward compatibility of the N standard has the consequence of lowering network performance while there are older laptops with integrated G adapters, wireless hand-held scanners, WiFi phones, wireless print servers, or any of the many wireless B or G clients around. To achieve full Wireless-N performance, companies are moving APs and clients to the uncongested 5GHz band where there are fewer legacy devices," explained Peter Newton, NETGEAR Director of Product Marketing for SMB Security and Wireless Products. "The ProSafe 802.11n Dual Band Wireless Access Point, which supports both 2.4GHz and 5.0GHz frequency bands, is the first in its class to offer 5GHz 802.11n support and provides businesses with an easy-to-manage solution for seamlessly transitioning the network infrastructure from 802.11g to 802.11n." The NETGEAR ProSafe 802.11n Dual Band Wireless Access Point (WNDAP330) incorporates a 10/100/1000 Gigabit Ethernet port with Auto Uplink(TM), a console port for local configuration and monitoring, and three detachable antennas (two 5dBi and one 3dBi). For ease-of-installation and placement, the WNDAP330 is plenum-rated for safe and convenient placement above drop-down ceilings and features 802.3af PoE to eliminate the need for a dedicated power outlet. The WNDAP330 is easily managed and configured using the ProSafe Control Center Web browser-based interface or via SNMP MIB I, MIB II and 802.11 MIB using network management software, such as NETGEAR's ProSafe Network Management System (NMS100). In addition to supporting all popular 802.1x port-based authentication protocols including Extensible Authentication Protocol (EAP) Transport Layer Security (TLS), Protected EAP (PEAP), and Tunneled TLS (TTLS), the WNDAP330 provides an extensive security feature set including WPA, WPA2, WEP, wireless access control, MAC address authentication, VPN pass-through support, secure SSH telnet, and Secure Sockets Layer (SSL) remote management login. The NETGEAR ProSafe 802.11n Dual Band Wireless Access Point (WNDAP330) is backed by a lifetime warranty and is immediately available via leading direct marketers, e-commerce sites and value added resellers at a list price of $475.
Want to learn more about wireless technologies?
Keywords: wireless distribution system, netgear prosafe, wireless access point, wpa wpa2, radius support, peter newton, hand held scanners, legacy devices, netgear inc, power cables, ntgr, coverage benefits, performance companies, print servers, 802.11a 5GHz |
